Cincinnati dividing head ID help please

Baitshop · Jun 7, 2019

Please forgive my ignorance. I have searched quite a bit today and I still need some help identifying this dividing head. It came with an unusual 12 inch chuck that is a combination 3 jaw scroll with t-slots in the face and individual adjustment on the three jaws. So I'm assuming this is a 12 inch model dividing head but I don't know for sure. Any help would be appreciated.

johnoder · Jun 7, 2019

They made 10, 12 and 14". Center height a little more than half that

There are also old and no so old. Old had threaded spindle noses and B&S taper in bore

Scans from 1923

Baitshop · Jun 8, 2019

It does have a threaded spindle and it's about 7.5" to the center of the spindle. Does this mean it's a 14 inch model? Was hoping to decode those numbers on the front somehow.

johnoder · Jun 8, 2019

Baitshop said:
It does have a threaded spindle and it's about 7.5" to the center of the spindle. Does this mean it's a 14 inch model? Was hoping to decode those numbers on the front somehow.

Yep, 14"

Maybe "Army Airforce Maintenance" ?

Just a guess

Search

Largest Manufacturing Technology Community on the Web

Search

Cincinnati dividing head ID help please

Baitshop

Aluminum

johnoder

Diamond

Attachments

Baitshop

Aluminum

johnoder

Diamond

Similar threads