What's new
What's new

cincinnati no2 universal milling machine

PAULLAP

Plastic
Joined
Feb 2, 2011
Location
UK
Hi I have a no 2 universal milling machine and we have lost the feed on the side to side feed, all the other feeds afe good and the rapid traverse is good , I really need someone to help me as I have no chance of getting an engineer to look at it at this difficult time. and we have to keep our company running as we do a lot of medical parts.


Paul
 
Might list model or year at least if you know it. The older ones are driven from the main motor and newer ones had a motor on the apron.
 
It's been a while since I worked on one. Your not helping either. A picture of the machine would help. Many of them were /are hydraulic shifters and I seem to recall the handle in front of the saddle that moves left and right moves a shifter valve on the right front of the saddle. The one I am thinking of had a frost plug on right side you had to remove and many times it is rusted stuck in there. and does not shift. This is a total guess. Have you checked the hydraulic pressure?
 








 
Back
Top