Cincinnati Toolmaster DD belt size

Jens.J · Jun 13, 2021

I bought a Cincinnati toolmaster DD a few days ago and the variable speed belt is missing. I got a instruction book from Lathes.co.uk but the belt size is difficult to see. Looks like a 16x6 or 8 x 450 but it's mostly guessing. Well do anybody know what size of belt fits?

Thanks Jens.J

rgsheehan · Aug 26, 2021

Hello,
I am not sure what a 'DD' model is. But I recently acquired a '1D' that has a variable speed drive, and I got a new belt for it. I have seen a few part numbers for these belts. Apparently, an 'older' number is 158588. I found a cross reference to the one I purchased, 2426V343.
I measured the following dimensions:
Outside Width: 38mm
Inside Width: 32.27mm
Thickness: ~12.7mm

according to a vendor:
Angle: 26 degrees
Outside circumference, 35.4 inches, (900mm?)

I am new to this, so I could be off track here, but I hope it helps.

Search

Largest Manufacturing Technology Community on the Web

Search

Cincinnati Toolmaster DD belt size

Jens.J

Plastic

rgsheehan

Plastic

Similar threads