K&T_Journeyman79
Aluminum
- Joined
- May 15, 2014
- Location
- Decatur AL USA
I own a K & T 2CH Horizontal Milling Machine and a High-Speed Universal Head with a Quill. I was given a homemade drive gear, but have mounting questions for other 2CH Owners to help answer.
1. Is the drive gear mounted directly to the spindle face?
2. If NO, what is the distance between the spindle face and gear?
3. How wide is the drive gear?
Since the drive and driven gears are helical, proper gear location is critical. Using an old tool holder to center the gear in the spindle. I just need the dimension off of the spindle face or machine column.
Thanks, in advance.
SJS
1. Is the drive gear mounted directly to the spindle face?
2. If NO, what is the distance between the spindle face and gear?
3. How wide is the drive gear?
Since the drive and driven gears are helical, proper gear location is critical. Using an old tool holder to center the gear in the spindle. I just need the dimension off of the spindle face or machine column.
Thanks, in advance.
SJS