Gavin Perkins
Plastic
- Joined
- Jan 16, 2018
I recently had an axis drive replaced and since then the machine has been making this god awful noise at specific locations on the X axis it also changes depending on the position of the Y axis. The housing where the bearings are vibrates like billyo.
The link below is to a video of the noise.
https://avalonengineeringcouk-my.sh...hMrHRQGc-esMUBEepM9SCilxIAd2SSk6CP8g?e=sIYIEz
I’m thinking of several things at could be causing it.
Thrust bearings
Servo motor giving up
Servo motor needing tuning but that might mask a mechanical issue.
Although parts that have been coming off have been dimensionally okay.
The machine has linear scales in the X and Y.
The picture is the drive that was replaced.
https://avalonengineeringcouk-my.sh...BOhZs5LfWsk9wBtSuAtyyPjguOzfoxdBkF1w?e=FjsVII
If anyone is able to chime in that would be great
The link below is to a video of the noise.
https://avalonengineeringcouk-my.sh...hMrHRQGc-esMUBEepM9SCilxIAd2SSk6CP8g?e=sIYIEz
I’m thinking of several things at could be causing it.
Thrust bearings
Servo motor giving up
Servo motor needing tuning but that might mask a mechanical issue.
Although parts that have been coming off have been dimensionally okay.
The machine has linear scales in the X and Y.
The picture is the drive that was replaced.
https://avalonengineeringcouk-my.sh...BOhZs5LfWsk9wBtSuAtyyPjguOzfoxdBkF1w?e=FjsVII
If anyone is able to chime in that would be great