Mr.Green
Cast Iron
- Joined
- Apr 20, 2011
- Location
- NE Indiana
Just got this thing temp wired up today after switching it to low voltage so I could see if it was worth a darn. Had a couple hydraulic leaks, fixed all but one, I may need to have a new line made with a different style fitting.
Everything functions correctly, I can still see the flaking on the table ways, has a nice mag chuck and the spindle bearings are smooth with no runout.
Machine is simple enough to figure out how to operate.
I do have a few questions.
1. What kind of wheels should I look for? Mostly just use it for general clean up of parts, mostly cast iron or steel.
2. What kind of wheel dresser do I need?
3. If I use coolant, how do I get it out of the tray? I see no drain or anything. I do have tall side shields for it.
Sent from my SM-N960U using Tapatalk
Everything functions correctly, I can still see the flaking on the table ways, has a nice mag chuck and the spindle bearings are smooth with no runout.
Machine is simple enough to figure out how to operate.
I do have a few questions.
1. What kind of wheels should I look for? Mostly just use it for general clean up of parts, mostly cast iron or steel.
2. What kind of wheel dresser do I need?
3. If I use coolant, how do I get it out of the tray? I see no drain or anything. I do have tall side shields for it.
Sent from my SM-N960U using Tapatalk