No downfeed working on this otherwise nice, working 2D. Quill is all the way “up” and won’t budge, but on power feed, the crank goes round and round at whatever feed speed/direction selected. With feed direction lever in neutral, feed crank can be rotated by hand in either direction, but quill doesn’t move at all. Quill can’t be moved by pressure on top or bottom of it. It is like the quill is totally disconnected from the downfeed mechanisms, both manual and power. Since quill is all the way up, maybe the limit cam disconnected it? I’ve played with that linkage, shown in the pix, but no luck.
John Morris has shared 4 photos with you! | Flickr
John Morris has shared 4 photos with you! | Flickr