What's new
What's new

K&T 2H original paint color(s)?

Thanks guys! Sounds like I may have original paint under some shoddy lighter gray and orange paint that was added later. What do you all think? Here's some pics:
IMG-8637.jpg
IMG-8638.jpg
 
The dark grey in the picture is original.
If you scrape through the dark grey you will find that they used a filler on the casting. You may not want to scrape or sand the filler off unless you can do auto body work. Bondo
Some repaints look worse than the peeling paint.
The castings can be pretty rough without the filler.
 
The dark grey in the picture is original.
If you scrape through the dark grey you will find that they used a filler on the casting. You may not want to scrape or sand the filler off unless you can do auto body work. Bondo
Some repaints look worse than the peeling paint.
The castings can be pretty rough without the filler.

I agree, if you are going to paint this machine simply remove the top layer. All you need to do is scuff the bottom layer and clean it very well. Its amazing how tough that old paint is.
 
If you want an exact color match to the old dark grey, have PPG (local body shop) run an analysis on it. Their computer can give you a cross-reference (if you don't want a quality custom mix for your paint gun).
 








 
Back
Top