S_W_Bausch
Diamond
- Joined
- Jan 15, 2010
- Location
- Indianapolis, Indiana, USA
Yep, the "Horizontal Mill" thread got me thinking.
I recall reading that many K&T horizontal/universal versions exist, and some were intended for production, not one-off machining tasks.
And perhaps an evolutionary dead-end or two.
John Oder, was that you commenting, perhaps you could provide a link to that discussion?
So, let's narrow it down to a K&T universal mill, weighing less than 10,000 lbs. Which ones are candidates for a toolroom/machine shop? Is the "under 10,000 lbs." a deal-breaker?
And why is any model especially qualified, or disqualified?
Thanks,
Steve
I recall reading that many K&T horizontal/universal versions exist, and some were intended for production, not one-off machining tasks.
And perhaps an evolutionary dead-end or two.
John Oder, was that you commenting, perhaps you could provide a link to that discussion?
So, let's narrow it down to a K&T universal mill, weighing less than 10,000 lbs. Which ones are candidates for a toolroom/machine shop? Is the "under 10,000 lbs." a deal-breaker?
And why is any model especially qualified, or disqualified?
Thanks,
Steve