L&S 1610 Compound Swivel Question
Close
Login to Your Account
Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2012
    Location
    USA, Virginia
    Posts
    185
    Post Thanks / Like
    Likes (Given)
    133
    Likes (Received)
    36

    Default L&S 1610 Compound Swivel Question

    While trying to reassemble the compound swivel on the base I found that the locating dowel is 1" while the hole in the swivel is .975". This is clearly not the original swivel. Debating on how to tackle this. Should I turn down the dowel or just open the swivel up? I'm thinking turning the dowel would be the easiest thing to get the correct allowances as I do have a lathe big enough to open up the hole in the swivel. Any advice would be greatly appreciated!

    Sent from my Pixel 4 XL using Tapatalk

  2. #2
    Join Date
    Jul 2004
    Location
    Houston, TX USA
    Posts
    32,132
    Post Thanks / Like

    Default

    Hopefully not hard as the dickens - a file test will shine some light on the question

  3. Likes Ja_cain, Paolo_MD liked this post
  4. #3
    Join Date
    Feb 2012
    Location
    USA, Virginia
    Posts
    185
    Post Thanks / Like
    Likes (Given)
    133
    Likes (Received)
    36

    Default

    Quote Originally Posted by johnoder View Post
    Hopefully not hard as the dickens - a file test will shine some light on the question
    Just checked it. Its pretty hard. Looks like I'll have to open the swivel up or have the dowel ground.

    Sent from my Pixel 4 XL using Tapatalk


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •