I recently picked up a P&W model C 12x30 lathe and this paperwork was in the side pump wiring compartment.
It's marked for the 14 and 16 inch lathes and dated FEB 1 1951. I don't know if the 12" is the same or not.
There are also some hand drawn diagrams in there as well so maybe it's not the same.
But it may help someone, so here it is.
The two white papers are getting very faded but could probably be read if needed.
The second to the last is for the push pull selector.
The pump is a Brown & Sharpe 3 ph 1/4 hp.
It's marked for the 14 and 16 inch lathes and dated FEB 1 1951. I don't know if the 12" is the same or not.
There are also some hand drawn diagrams in there as well so maybe it's not the same.
But it may help someone, so here it is.
The two white papers are getting very faded but could probably be read if needed.
The second to the last is for the push pull selector.
The pump is a Brown & Sharpe 3 ph 1/4 hp.