Mr_CNC_guy
Cast Iron
- Joined
- Jul 29, 2018
- Location
- New England
I am going through all the stuff that came with my Cincinnati #2 TCG.
One of the adapters is a Pope W 401 with a captive nut. When I looked
at the threads in the nut they looked stripped. On closer examination
they are not messed up, the nut is threaded for both left and right
hand threads.
The Pope spindle on my TCG is double ended with a left hand thread on
one end and a right hand thread on the other end, perfectly standard.
This threads smoothly on both ends! I have never seen such a thing.
Is this common?
See the crossed threads.
One of the adapters is a Pope W 401 with a captive nut. When I looked
at the threads in the nut they looked stripped. On closer examination
they are not messed up, the nut is threaded for both left and right
hand threads.
The Pope spindle on my TCG is double ended with a left hand thread on
one end and a right hand thread on the other end, perfectly standard.
This threads smoothly on both ends! I have never seen such a thing.
Is this common?
See the crossed threads.
