upthebikes
Cast Iron
- Joined
- Aug 23, 2007
- Location
- Great Lakes USA
Taking delivery of a new-to-me vmc soon, and the deal got done quick.
3 axis Fanuc OM Japanese machine, spindle rated 15hp. I currently run a 10hp balanced phase craft panel from our member jim here with a toshiba 10hp converter duty motor. I don’t think I’ll have time enough before the machine gets here to source and build a larger converter ...
In order to inspect the machine and make sure nothing was damaged during rigging / transport etc, I’d like to hook up existing power to it and check it out. Thoughts that this might work? Am I at risk of damaging any drives by doing so?
I am guessing a low voltage alarm would pop up if this doesn’t have enough juice.
Thanks!
3 axis Fanuc OM Japanese machine, spindle rated 15hp. I currently run a 10hp balanced phase craft panel from our member jim here with a toshiba 10hp converter duty motor. I don’t think I’ll have time enough before the machine gets here to source and build a larger converter ...
In order to inspect the machine and make sure nothing was damaged during rigging / transport etc, I’d like to hook up existing power to it and check it out. Thoughts that this might work? Am I at risk of damaging any drives by doing so?
I am guessing a low voltage alarm would pop up if this doesn’t have enough juice.
Thanks!