I have a 95 Cincinnati arrow with A2100 control and have had a slew of problems since Nov. I think all boards have been repaired, X axis drive and just got the Z axis drive back. Right before I sent the Z drive in I was getting a hard dragging noise in the Y axis while jogging to align. I removed all the way covers and manually greased the screw and started to jog in Y which doesn't seem to be helping but then I could not jog (using pendant) in Y+, Z+ or X+. I shut the machine down, powered back up and I could move in all directions except Z+ then X & Y followed. Any ideas on why 1: the jog stopped working and 2: what is causing all the noise and I'm also getting a bit of noise in the X+ the closer I get to the travel limits. Any help would be greatly appreciated. And if anybody knows of someone that will service this machine in Delaware that info would be great.
Thanks in advance
Scott
Thanks in advance
Scott