Hi everyone
we've had this problem for a long time...
machining a square with G112(G12.1) of accuracy question
using test indicator to measure squareness and straightness and concentricity of surface
the test results are as follows
https://youtu.be/FjUvMglQSBg
when the C axis is 180°, the square eccentricity of 0.24mm
how adjustment the accuracy of G112(G12.1)?
※ the live tool is on center of the machine
※ it's a Taichung Vturn A20Y machine with a Fanuc Oi-TF control.
we've had this problem for a long time...
machining a square with G112(G12.1) of accuracy question
using test indicator to measure squareness and straightness and concentricity of surface
the test results are as follows
https://youtu.be/FjUvMglQSBg
when the C axis is 180°, the square eccentricity of 0.24mm
how adjustment the accuracy of G112(G12.1)?
※ the live tool is on center of the machine
※ it's a Taichung Vturn A20Y machine with a Fanuc Oi-TF control.