Collect.Create
Plastic
- Joined
- Jun 17, 2021
I have recently done a spindle rebuild and installed a new pulley on the spindle,
I goto tool change and it doesnt want to lock in the groove to orient for a proper tool change 90% of the time.
can anyone point me in the right direction to test the sensor
and if that doesnt come up with result, is it a solenoid engagement issue?
i cant find any literature on the distance of stroke on the solenoid as it doesnt seem to have enough pressure to lock in place
Heres a a couple videos about whats happenning:
tool changer solenoid groove skip - YouTube
sensor lineup - YouTube
thanks
I goto tool change and it doesnt want to lock in the groove to orient for a proper tool change 90% of the time.
can anyone point me in the right direction to test the sensor
and if that doesnt come up with result, is it a solenoid engagement issue?
i cant find any literature on the distance of stroke on the solenoid as it doesnt seem to have enough pressure to lock in place
Heres a a couple videos about whats happenning:
tool changer solenoid groove skip - YouTube
sensor lineup - YouTube
thanks