HI All
I have an ancient Bridgeport Boss-II with an equally ancient Ah-Ha control box with just the DS124 controller boards and a BOB connecting them to the PC running LinuxCNC. Been working great, BUT I'd appreciate any help with the following:
1. Manuals, specifications, wiring drawings for the AH-HA stepper controller boards--and possibly a source for a spare board.
2. The same for the bridgport mill, the specifications for the stepper motors in particular.
3. Any information on alternate stepper controller modules that are KNOWN to work with the stepper motors on this mill. The settings on the AH-HA board suggest it is set for 10Amps, but the highest power replacement I can find is a 7A Gecko module.
Thanks
Kelly
I have an ancient Bridgeport Boss-II with an equally ancient Ah-Ha control box with just the DS124 controller boards and a BOB connecting them to the PC running LinuxCNC. Been working great, BUT I'd appreciate any help with the following:
1. Manuals, specifications, wiring drawings for the AH-HA stepper controller boards--and possibly a source for a spare board.
2. The same for the bridgport mill, the specifications for the stepper motors in particular.
3. Any information on alternate stepper controller modules that are KNOWN to work with the stepper motors on this mill. The settings on the AH-HA board suggest it is set for 10Amps, but the highest power replacement I can find is a 7A Gecko module.
Thanks
Kelly