DocsMachine
Titanium
- Joined
- Jan 8, 2005
- Location
- Southcentral, AK
I have a machine with an older fluorescent tube light for inside the enclosure. Said light is dead, both bulb and ballast, so I'd like to swap the whole assembly out with a hopefully brighter LED unit. It's a standalone part, I can fit a light of almost any size and shape in there, though with a max of only maybe 24" long. (Old tube is about 18-19" overall.)
McMaster has a nice selection, and of course there's a ton on eBay ranging from $29.95 crap to $800 repurposed driving light assemblies.
Any recommendations for something good, waterproof and reasonably bright? Current setup is 110V, but I could make a 12V/24V work too.
Doc.
McMaster has a nice selection, and of course there's a ton on eBay ranging from $29.95 crap to $800 repurposed driving light assemblies.
Any recommendations for something good, waterproof and reasonably bright? Current setup is 110V, but I could make a 12V/24V work too.
Doc.