Anilam Crusader M issues
Close
Login to Your Account
Likes Likes:  0
Results 1 to 4 of 4
  1. #1
    Join Date
    Oct 2020
    Country
    UNITED STATES
    State/Province
    Pennsylvania
    Posts
    5
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default Anilam Crusader M issues

    I recently purchased an bridgeport style mill with a anilam crusader M control. I have the machine powering up and the screen only displays one line of pixles. So im looking into replacing the CRT monitor. The servos however are noisy and move around. Is there a tuning procedure? Also i have the programming manual, are there any other manuals out there for the control?

    Thanks
    Pat

  2. #2
    Join Date
    Feb 2011
    Location
    USA
    Posts
    260
    Post Thanks / Like
    Likes (Given)
    28
    Likes (Received)
    44

    Default

    little off the topic, But do you know how to run the machine? I have some training VHS tapes if you would pay freight I would send them to you.

  3. #3
    Join Date
    Feb 2011
    Location
    USA
    Posts
    260
    Post Thanks / Like
    Likes (Given)
    28
    Likes (Received)
    44

    Default

    Sorry , but they just left in the trash dumpster this morning.

  4. #4
    Join Date
    Dec 2009
    Location
    N.E. Pa.
    Posts
    125
    Post Thanks / Like
    Likes (Given)
    7
    Likes (Received)
    4

    Default

    Try powering the machine down then open the large cnc cabinet door. On the door there are circuit boards with colored tabs. Take the clamp off securing these and toggle the tabs so the boards move out and back in their sockets. Put the clamp back on and retry. You might need to do this more then once. Dan


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •