oppster
Aluminum
- Joined
- Sep 12, 2016
Hi,
We have a potential order going through for next February. Inconel 625.
We are fine with the 6mm tapping of which is an Emuge tap.
My main concern is the 7/8's UNC threads. We have a 2 tipped threadmill, of which i know will be time consuming.
16 holes a component, 75+ components per month.
I'm here fishing for ideas, i feel if we go for a 7/8th tap, we aren't going to get more than 50 holes.
That#s if our machine can power a tap that big through Inco. The 6mm Taps normally do approx 60ish holes as far as i can remember in a test piece we tried a few year back.
Thanks in advance.
Paul
We have a potential order going through for next February. Inconel 625.
We are fine with the 6mm tapping of which is an Emuge tap.
My main concern is the 7/8's UNC threads. We have a 2 tipped threadmill, of which i know will be time consuming.
16 holes a component, 75+ components per month.
I'm here fishing for ideas, i feel if we go for a 7/8th tap, we aren't going to get more than 50 holes.
That#s if our machine can power a tap that big through Inco. The 6mm Taps normally do approx 60ish holes as far as i can remember in a test piece we tried a few year back.
Thanks in advance.
Paul