Houndogforever
Hot Rolled
- Joined
- Oct 20, 2015
- Location
- Boring
Well this is an interesting find.
Hardinge Bridgeport GX 300 Vertical Mill – NEW! -...
Hardinge Machine Tools, B.V. (Made in Taiwan)
Model: Bridgeport GX 300 (New)
Serial No.: Available for Serious Inquiry
Electrics: 220 Volt / 3 Phase / 60 Cycle / FLA: 72A / Spindle Drive: 39A
Power: 22 kW
Date of Manufacture: January 2017
Features and Specifications:
…Travels: X – 11.8” / Y – 15.8” / Z – 16.9”
…Table: 16” x 24”
…Distance Spindle-Table: 5.9” – 22.8”
…No ATC; Single Tool Spindle
…Cat 40 Taper
…Max Spindle Speed: 7,080 RPM
…Max Table Loading: 180 KG (397 lbs.)
…Max Tool Diameter: 80 MM (3.15”)
…Max Tool Length: 225 MM (8.85”)
…Max Tool Weight: 7 KG (15.42 lbs.)
…3-Axis (X,Y,Z)
…NC Control: Fanuc Oi-MF
…Coolant System: Tank and Pump
…Rigid Tapping, RS-232 Port
Machine Dimensions (approx.): 96” x 55” x 88”
Coolant Tank (approx.): 47” x 26”
Machine Weight (approx.): 5190 KG (11,500 lbs.)
Functionality Notes: Machine purchased new by present owner; machine is still in packaging, never connected, never used. Have CDs for Fanuc controller, operations manual, and quality inspection reports.
EQUIPMENT LOCATION: Portland, OR
I wonder why this was never used.
Seems like a good, small machine for heavy cutting.
Hardinge Bridgeport GX 300 Vertical Mill – NEW! -...
Hardinge Machine Tools, B.V. (Made in Taiwan)
Model: Bridgeport GX 300 (New)
Serial No.: Available for Serious Inquiry
Electrics: 220 Volt / 3 Phase / 60 Cycle / FLA: 72A / Spindle Drive: 39A
Power: 22 kW
Date of Manufacture: January 2017
Features and Specifications:
…Travels: X – 11.8” / Y – 15.8” / Z – 16.9”
…Table: 16” x 24”
…Distance Spindle-Table: 5.9” – 22.8”
…No ATC; Single Tool Spindle
…Cat 40 Taper
…Max Spindle Speed: 7,080 RPM
…Max Table Loading: 180 KG (397 lbs.)
…Max Tool Diameter: 80 MM (3.15”)
…Max Tool Length: 225 MM (8.85”)
…Max Tool Weight: 7 KG (15.42 lbs.)
…3-Axis (X,Y,Z)
…NC Control: Fanuc Oi-MF
…Coolant System: Tank and Pump
…Rigid Tapping, RS-232 Port
Machine Dimensions (approx.): 96” x 55” x 88”
Coolant Tank (approx.): 47” x 26”
Machine Weight (approx.): 5190 KG (11,500 lbs.)
Functionality Notes: Machine purchased new by present owner; machine is still in packaging, never connected, never used. Have CDs for Fanuc controller, operations manual, and quality inspection reports.
EQUIPMENT LOCATION: Portland, OR
I wonder why this was never used.
Seems like a good, small machine for heavy cutting.