Brother A00 Control Machine- Adding Air Blow

Pete Deal · Nov 16, 2018

Brother A00 Control Machine- Adding Compressed Air Blow

I have a Brother with the A00 control. I would like to add compressed air blow that can be used as an alternative to flood coolant. I see there are M codes that seem to control outputs but I don't see anything in the manuals that detail where to pickup the outputs. Anybody got any insight?

BROTHERFRANK · Nov 16, 2018

It's in the Installation manual and some in the Operation manual. Programmable Inputs/Outputs. The terminal strips are on the I/O board on the left wall of the control cabinet. you program (map) the outputs in the data bank screen. For example you can program an output that isn't being used to M402. An M402 will turn on the output (24 VDC) and M403 turns it off.

Pete Deal · Nov 17, 2018

I see it now thanks Brotherfrank! Now a little ebay shopping for a valve and relay.

Search

Largest Manufacturing Technology Community on the Web

Search

Brother A00 Control Machine- Adding Air Blow

Pete Deal

Titanium

BROTHERFRANK

Stainless

Pete Deal

Titanium

Similar threads