gustafson
Diamond
- Joined
- Sep 4, 2002
- Location
- People's Republic
So, the Brother does not accept a Z argument for G12/13 [as some controls apparently do] and I am really stumped at how to pull off what I need to to, all day every day
Here is how I have been running things for decades:
Create a list of hole locations
Drill at those hole locations
countersink at those hole locations
tap at those hole locations
Pretty simple, and I can make the Speedio do that, however, it is so foooking fast, it needs to back burr, both for quality and the simple fact I cannot back burr in the time it takes to make the part. I own most of those stupid back burring tools and they will not will not will not work for my application.
Dovetail tool circular interpolate from the top.
Period.
Tools are 50 bucks a pop. I am simply unwilling to risk a clerical error burying one in the middle of the part
So I need to have it circular/helical interpolate using the same set of hole locations
Possible, or do I have a 100k paperweight?
Here is how I have been running things for decades:
Create a list of hole locations
Drill at those hole locations
countersink at those hole locations
tap at those hole locations
Pretty simple, and I can make the Speedio do that, however, it is so foooking fast, it needs to back burr, both for quality and the simple fact I cannot back burr in the time it takes to make the part. I own most of those stupid back burring tools and they will not will not will not work for my application.
Dovetail tool circular interpolate from the top.
Period.
Tools are 50 bucks a pop. I am simply unwilling to risk a clerical error burying one in the middle of the part
So I need to have it circular/helical interpolate using the same set of hole locations
Possible, or do I have a 100k paperweight?