Hi guys,
On our Bridgeport Fanuc Oi-MD VMC I am able to call a subprogram located on a memory card using an M198. The problem is that the rapid, and seemingly feed, overrides are not responding. The machine is running at 100% for both of them no matter what position the knobs are in on the controller. I tried loading it onto the CNC memory and running it with M98 instead, and that worked fine. Is there something that I am missing?
Thanks!
On our Bridgeport Fanuc Oi-MD VMC I am able to call a subprogram located on a memory card using an M198. The problem is that the rapid, and seemingly feed, overrides are not responding. The machine is running at 100% for both of them no matter what position the knobs are in on the controller. I tried loading it onto the CNC memory and running it with M98 instead, and that worked fine. Is there something that I am missing?
Thanks!
