I have a Cincinnati Gilbert Mill Model 4C-223 that had all the parameters blown away. I've got all the Fanuc parameters reentered, but the machine parameters and Macros are still gone. I've talked to Cincinnati Gilbert, and they don't have them either. Anyone have any ideas on where to find out any information on this?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
Cincinnati Gilbert Fanuc Control problems
- Thread starter thoran5
- Start date
- Replies 3
- Views 898
ifixcnc
Hot Rolled
- Joined
- Feb 6, 2015
- Location
- Cleveland Ohio
If Fanuc ever did a service call on the machine, they normally do an full backup.
Its a long shot, but better than nothing.
If you are not the original owner, maybe the last owner backed it up.
Its a long shot, but better than nothing.
If you are not the original owner, maybe the last owner backed it up.
Vancbiker
Diamond
- Joined
- Jan 5, 2014
- Location
- Vancouver, WA. USA
What model control is it? If it is new enough to have the ladder visible on the display, a good tech with really, really good skills at reading ladder logic could figure them out. A tough and very time consuming process if there is much complexity to the machine.
