Cincinnati Sabre 750
Close
Login to Your Account
Results 1 to 1 of 1
  1. #1
    Join Date
    Jan 2019
    Country
    UNITED STATES
    State/Province
    Ohio
    Posts
    1
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default Cincinnati Sabre 750

    We have in our shop a Sabre 750 with A2100 controls, was working perfect one day and we shut it down and went to start it couple days later and it gives us 39-53 axes not ready and if we keep trying to start it we then get a 39-6 axes overload. We do not have any errors on the drives themselves other than undervolts which goes away as soon as you try starting it up. We tried all the drives with drives from another working machine we have with no luck, even the power supply and the spindle drive. I also tried another encoder cable to the x, y and z axis and it does the same thing. Any ideas?? Thank you in advance


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
2