Rogue_Machinist
Hot Rolled
- Joined
- Jul 26, 2011
- Location
- Oregon, USA
Ok I used to knurl when i worked in a production shop but that was years ago. I have since forgotten how to set up and program a knurling job.
I need to program a knurl in D2 tool steel using a HSS 25tpi knurling tool. I dont even know if thats gonna be possible. Second we got a brand new Dorian Tool knurling tool.
How to cut knurl and is it a single pass and how do I set the tool. Its been probably 10 years since I did any knurling.
Sent from my HD1925 using Tapatalk
I need to program a knurl in D2 tool steel using a HSS 25tpi knurling tool. I dont even know if thats gonna be possible. Second we got a brand new Dorian Tool knurling tool.
How to cut knurl and is it a single pass and how do I set the tool. Its been probably 10 years since I did any knurling.
Sent from my HD1925 using Tapatalk