Florin-Alin
Plastic
- Joined
- Jul 6, 2016
Hi guys! My boss bought from an auction this machine Mikron WF51 D with TNC 407 opperating sistem and we have some issues with this old lady...
When trying to pass referince points after pressing FEED ON button, for example holding -Z axis on the screen apears a numerical value of F (ex. F500) for about 5 secounds and after the value disapears and the axis will not move in all that time and in the lower left side of the screen the "*" (star) remains active wich indicates that axis is moving. So nothing happens and no error apears...but after all of that if I press MANUAL button it activates emergency stop and I recive an error "13 FEED DRIVE NOT READY".
Any solutions, guys...? I should try to make a video and be more explicit!
Any help should be so, so welcome!
When trying to pass referince points after pressing FEED ON button, for example holding -Z axis on the screen apears a numerical value of F (ex. F500) for about 5 secounds and after the value disapears and the axis will not move in all that time and in the lower left side of the screen the "*" (star) remains active wich indicates that axis is moving. So nothing happens and no error apears...but after all of that if I press MANUAL button it activates emergency stop and I recive an error "13 FEED DRIVE NOT READY".
Any solutions, guys...? I should try to make a video and be more explicit!
Any help should be so, so welcome!