Does anybody know the correct RS232 cable pin out for connecting a 9-pin serial to a 25-pin on a Fanuc 3T control?
I am using DNC4U with a laptop with a serial port.
I am able to download from the CNC to the PC but I cannot upload to the CNC from the PC.
DNC4U sends the code, but the CNC control wont "take" it.
The control shows a flashing "LSK" in the bottom right corner, and won't stop unless I keep pressing reset.
I've spent a while looking at different pin out configurations and there seems to be conflicting information.
If it helps at all the machine is a Citizen Cincom F12.
Thank you,
I am using DNC4U with a laptop with a serial port.
I am able to download from the CNC to the PC but I cannot upload to the CNC from the PC.
DNC4U sends the code, but the CNC control wont "take" it.
The control shows a flashing "LSK" in the bottom right corner, and won't stop unless I keep pressing reset.
I've spent a while looking at different pin out configurations and there seems to be conflicting information.
If it helps at all the machine is a Citizen Cincom F12.
Thank you,