I’m trying to see if this thing will Rigid tap. My day shift buddy hasn't ever done it but swears to me it will but his word is all I have, I’m not so sure. I think I had a dream where I went through this before and broke the very first tap and called it quits and gave up went back to the spring holder. All of this shit runs and without the risk of breaking more shit it looks to me like all of these have spindle drift at the end with no slide movement. The book I have calls the G84 a tapping cycle and no mention of M29. I see that in the G code list on the control they have a G84.2 listed as Rigid tap but when I try to run it the spindle comes on then pukes a PS0010 IMPROPER G-CODE. G32 is synchronized feed, isn’t that what rigid is? Is the only benefit to G32 tapping is that it disables the feed/spindle overrides? How can I tell for positive if this thing has Rigid tap or not?
Fanuc 0i-TC or D? Thanks....
Brent
:1111(RIGID TAP 1/2" - 13)
G0G99G40G54X14.Z10.T0
T0606
M41
G0X.0Z.15
G97S350M29M3
G84Z-1.55F.076923
G80G0Z.5
G0G40G54X14.Z10.T0
M30
:2222(TAP CYCLE 1/2"-13)
G0G99G40G54X14.Z10.T0
T0606
M41
G97S350M3
G0X.0Z.15
G84Z-1.55F.076923
G80G0Z.5
M9
G0G40G54X14.Z10.T0
M30
:3333(G32 TAP 1/2" - 13)
G0G99G40G54X14.Z10.T0
T0606
M41
G97S350M3
G0X0Z.5M8
G32Z-1.55F.076923
Z.5M4
M9
G0G40X14.Z10.T0
M30
Fanuc 0i-TC or D? Thanks....
Brent
:1111(RIGID TAP 1/2" - 13)
G0G99G40G54X14.Z10.T0
T0606
M41
G0X.0Z.15
G97S350M29M3
G84Z-1.55F.076923
G80G0Z.5
G0G40G54X14.Z10.T0
M30
:2222(TAP CYCLE 1/2"-13)
G0G99G40G54X14.Z10.T0
T0606
M41
G97S350M3
G0X.0Z.15
G84Z-1.55F.076923
G80G0Z.5
M9
G0G40G54X14.Z10.T0
M30
:3333(G32 TAP 1/2" - 13)
G0G99G40G54X14.Z10.T0
T0606
M41
G97S350M3
G0X0Z.5M8
G32Z-1.55F.076923
Z.5M4
M9
G0G40X14.Z10.T0
M30