DPRINT not working on Mazak VCN-570C
I have my machine configured to output DPRNT as a text file to a specified location on my machine. I ran a test program:
POPEN
DPRNT[TEST]
PCLOS
The result was a text file in the expected director that read "TEXT"
Now when I run an inspection probing routine, the DPRINT function is not outputting any report file. And ideas?
Example Probing Cycle Below:
O5555 (PROBE WITHOUT MACHINE CONFIG)
(T30 D=0.2362 CR=0.1181 - ZMIN=-0.9862 - PROBE)
G90 G94 G17 G49
G20
G53 G0 Z0.
(PROBE WCS3)
G90
T30 M6
(RENISHAW OMP60 6MM X 100MM)
G54
G0 X0. Y0.
G43 Z3. H30
G65 P9832
G65 P9810 Z1. F100.
G65 P9812 Y7.5 Z-0.9862 Q0.4 R0.5 W1. S1.
G65 P9810 Z1.
G0 Z3.
M350
G65 P9833
M5
G53 Z0.
M152
M30
I have my machine configured to output DPRNT as a text file to a specified location on my machine. I ran a test program:
POPEN
DPRNT[TEST]
PCLOS
The result was a text file in the expected director that read "TEXT"
Now when I run an inspection probing routine, the DPRINT function is not outputting any report file. And ideas?
Example Probing Cycle Below:
O5555 (PROBE WITHOUT MACHINE CONFIG)
(T30 D=0.2362 CR=0.1181 - ZMIN=-0.9862 - PROBE)
G90 G94 G17 G49
G20
G53 G0 Z0.
(PROBE WCS3)
G90
T30 M6
(RENISHAW OMP60 6MM X 100MM)
G54
G0 X0. Y0.
G43 Z3. H30
G65 P9832
G65 P9810 Z1. F100.
G65 P9812 Y7.5 Z-0.9862 Q0.4 R0.5 W1. S1.
G65 P9810 Z1.
G0 Z3.
M350
G65 P9833
M5
G53 Z0.
M152
M30