Hello,
I have a Kaguga mill that was originally a Delta 10 system when I bought it. I updated to the Dynapath Delta 2000 with conversational graphics. We added a forth axis in a rotary table for rotation.
My problem is I don't recall how to get a program saved on the hard drive back to the control panel so I can run it again.
Any thoughts on how to do this would be of help. I was wondering if I could plug a laptop directly into the hard drive and transfer the program to the conventional graphics screen. The machine is connected to my desktop in my office with the com 1 port, which is a RS232 plug.
I'm new to this CNC machining, I've been doing conventional machining for more then 40 years. I realize this is the next step to take my business to a higher level.
Thanks
JASWEST, Steve
I have a Kaguga mill that was originally a Delta 10 system when I bought it. I updated to the Dynapath Delta 2000 with conversational graphics. We added a forth axis in a rotary table for rotation.
My problem is I don't recall how to get a program saved on the hard drive back to the control panel so I can run it again.
Any thoughts on how to do this would be of help. I was wondering if I could plug a laptop directly into the hard drive and transfer the program to the conventional graphics screen. The machine is connected to my desktop in my office with the com 1 port, which is a RS232 plug.
I'm new to this CNC machining, I've been doing conventional machining for more then 40 years. I realize this is the next step to take my business to a higher level.
Thanks
JASWEST, Steve
