SShep71
Hot Rolled
- Joined
- Sep 17, 2014
- Location
- San Diego, Ca
I am looking at adding an Emco Turn live tool lathe to my shop, it is an older machine but is in running/working condition. There is a 21iT Fanuc control on the machine. I wanted to reach out and see if there is service readily available in Southern California. I do NOT want to go through the same issue as I went through with my ECOCA lathe fiasco, in which in the near 6 years I have owned the machine it has never worked due to the lack of service for the machine. Does anyone have any feedback or advice on the Emco Turn?