RC Mech
Stainless
- Joined
- Jul 21, 2014
- Location
- Ontario, Canada
Searched for this, Google and PM to no avail. Recently had a Fadal VMC 15XT dropped on our floor, 88HS control. Clean little machine.
There are two coolant pumps. 10k spindle. One has a mesh basket the pump head sits in, the other nothing. Why have two pumps? I can figure out which is the flood coolant pump but the other one appears to go into the head?
Machine has the typical Flood/Mist outlet on the back, with the Mist socket plugged. I didn't personally disconnect the machine from previous shop but apparently PO had both coolant pumps plugged into the wall .
There are two coolant pumps. 10k spindle. One has a mesh basket the pump head sits in, the other nothing. Why have two pumps? I can figure out which is the flood coolant pump but the other one appears to go into the head?
Machine has the typical Flood/Mist outlet on the back, with the Mist socket plugged. I didn't personally disconnect the machine from previous shop but apparently PO had both coolant pumps plugged into the wall .