DMSentra
Cast Iron
- Joined
- Sep 12, 2008
- Location
- Eugene Oregon
Lots of tapping on 3 lathes at my old work, first time on this one.
N30T800G40
N40G50S200M41
N50G97S150M4(FORWARD ON THIS LATHE)
N60G0G54X0T.2T808
N70G1Z-2.F.0625
N80M5
N90G1Z.2M3
stops the spindle and feeds back out. Using a M0 instead stops and freezes the program. Including G97 and S150 in the N90 line changes nothing. No difference with OPT STOP on or off. No difference with SINGLE STOP on or off.
Some code I don't know about that is particular to this control?
N30T800G40
N40G50S200M41
N50G97S150M4(FORWARD ON THIS LATHE)
N60G0G54X0T.2T808
N70G1Z-2.F.0625
N80M5
N90G1Z.2M3
stops the spindle and feeds back out. Using a M0 instead stops and freezes the program. Including G97 and S150 in the N90 line changes nothing. No difference with OPT STOP on or off. No difference with SINGLE STOP on or off.
Some code I don't know about that is particular to this control?