Tailstock help okuma lathe

tay2daizzo8 · Apr 9, 2018

I have an osp200 control

My mail question was how do i set the stopping pressure? the machine has 2 pedals allegedly for the tail stock to feed in or incremental feed. The guys at Robert e morris told me the tailstock extends automatically with the m codes in the program and stops when it hits a certain torque. Anyone know how to see how much this is set for?

Thanks

litlerob1 · Apr 9, 2018

On the older Machines there is a Gauge, but you still have to engage the TS into a part, to see the reading. I'm sure there is some pre-setting, I just don't know it.

R

Booze Daily · Apr 9, 2018

My tailstock advances until it hits the part or runs out of travel. There is a pressure valve and gage on the back of my machine above the hydraulic tank to set tailstock pressure. It's just like setting chuck pressure.

Search

Largest Manufacturing Technology Community on the Web

Search

Tailstock help okuma lathe

tay2daizzo8

Hot Rolled

litlerob1

Diamond

Booze Daily

Titanium

Similar threads