Fanuc 11M Tool Changer problem
Close
Login to Your Account
Likes Likes:  0
Results 1 to 1 of 1
  1. #1
    Join Date
    Jan 2016
    Country
    UNITED STATES
    State/Province
    New York
    Posts
    20
    Post Thanks / Like
    Likes (Given)
    34
    Likes (Received)
    0

    Lightbulb Fanuc 11M Tool Changer problem

    Hi .
    The old Stama Mc300 has a 30 pos linear tool magazine under the spindle . when the Spindle goes to reference position it puts the tool in its magazine place and changes the tool to other one and when coming down automatically takes the tool .

    The problems are .

    1) it randomly changes the tool in only left or only right handed direction in every machine power on when calling in MDI.( it changes in both directions in Manual mode by hard keys beside the magazine )

    2) it Shifts 3 position between spindle and magazine charge position which causes not to bring the called tool number .( we put LEDs on tool magazine encoder and found it works properly and exactly knows the tool number but on CRT it thinks its the tool we called but actually it is not.

    Any help would be really appreciated .

    Regards


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •