What's new
What's new

Fanuc 11M Tool Changer problem

behnod

Plastic
Joined
Jan 24, 2016
Hi .
The old Stama Mc300 has a 30 pos linear tool magazine under the spindle . when the Spindle goes to reference position it puts the tool in its magazine place and changes the tool to other one and when coming down automatically takes the tool .

The problems are .

1) it randomly changes the tool in only left or only right handed direction in every machine power on when calling in MDI.( it changes in both directions in Manual mode by hard keys beside the magazine )

2) it Shifts 3 position between spindle and magazine charge position which causes not to bring the called tool number .( we put LEDs on tool magazine encoder and found it works properly and exactly knows the tool number but on CRT it thinks its the tool we called but actually it is not.

Any help would be really appreciated .

Regards
 








 
Back
Top