I have very little to no Fanuc experience. That being said, I purchase an older Kitamura with an Fanuc control figuring it is time to learn. I have worked with Hurco, Centroid and Siemens controls in the past and I seem to always have problem with the Fanuc whenever I give it a try... I purchased a Titan DNC to load a program into the machine. I installed a short program to test the setup and have not been able to get the machine to read the program. I tried drip feed in edit and nothing. Is there anyone who can give me a step by step on feeding the program into the machine?
I have watched numerous videos trying different methods and nothing. The machine works perfectly with the old programs stored in it.
Loading parameters of DNC: Protocol RS232, Flow Control software, Code ASCII/ISO, Baudrate 9600, Data Bits 7, Parity even, Stop bits 2.
Obviously operator error... any help appreciated.
I have watched numerous videos trying different methods and nothing. The machine works perfectly with the old programs stored in it.
Loading parameters of DNC: Protocol RS232, Flow Control software, Code ASCII/ISO, Baudrate 9600, Data Bits 7, Parity even, Stop bits 2.
Obviously operator error... any help appreciated.