Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Was this machine running recently?
Two things.
I don't think you have as much memory installed as these parameters suggest. All your memory slots would have to be full and they're not.
Try changing your 901 to
N0901 P 11100100
or this
N0901 P 11100010
From what I'm gathering, only bits 0 and/or bit 5 are usable for lathe. The rest you tried are for mills.
N0905 P 00000001 (PMC Type L 3000 steps)
N0905 P 00100000 (PMC Type M 5000 steps)
You might want to wait for someone smarter then me to verify before trying.
Hope I haven't broken any rules. :-)
Cool pic. Saved it if you don't mind. They're very much the same as they are different.
I have the board like the OP does and yes all slots need filling for max memory. It does look as if some of the slots are filled but am not sure what that would give him memory wise. Also not so sure about the stock nature of the Toshiba chips in there. Meaning is any cross reference a proper one? That is out of my league.
Isn't the yellow box a custom made macro from Fanuc? My plug there is empty.
.......
From what I'm gathering, only bits 0 and/or bit 5 are usable for lathe. The rest you tried are for mills.
N0905 P 00000001 (PMC Type L 3000 steps)
N0905 P 00100000 (PMC Type M 5000 steps)
You might want to wait for someone smarter then me to verify before trying.
Hope I haven't broken any rules. :-)
......Also not so sure about the stock nature of the Toshiba chips in there. Meaning is any cross reference a proper one? That is out of my league.....
Notice
This website or its third-party tools process personal data (e.g. browsing data or IP addresses) and use cookies or other identifiers, which are necessary for its functioning and required to achieve the purposes illustrated in the cookie policy. To learn more, please refer to the cookie policy. In case of sale of your personal information, you may opt out by sending us an email via our Contact Us page. To find out more about the categories of personal information collected and the purposes for which such information will be used, please refer to our privacy policy. You accept the use of cookies or other identifiers by closing or dismissing this notice, by scrolling this page, by clicking a link or button or by continuing to browse otherwise.