I'm looking into a Fanuc Robodrill Mate (2006 or 2007) setup for my garage. I've searched high and low for a brochure or setup manual with no luck and am hoping someone here can help me out with a few setup questions.
-What is the footprint requirement? Can this be pushed/reduced in any certain direction? Which direction does the coolant tank roll out and how much room is needed for that?
-I've seen the height marked at 88 inches. Can 7-8 inches of height be reduced by removing the energy chain or other basic bolt on parts? Hoping to get this under an 82in garage door using a pallet jack.
-A lot of these "Mate" Robodrill machines show the 0i-MC control without mention of the word mate on the control. The word mate is in the machine model name and marked on the enclosure itself. I've read mixed information on whether a 4th axis is possible to add. It sound like the 0i-Mate control does not allow it. If the machine shows the 0i-MC control (no "mate" word) is this something different from the Mate-style control and can the 4th be added? Or since the 0i-MC control is on a Mate machine does that mean its got a dumbed down Mate version of the 0i-MC control?
-Does anyone have a manual for the machine that can be shared?
Thanks!
-What is the footprint requirement? Can this be pushed/reduced in any certain direction? Which direction does the coolant tank roll out and how much room is needed for that?
-I've seen the height marked at 88 inches. Can 7-8 inches of height be reduced by removing the energy chain or other basic bolt on parts? Hoping to get this under an 82in garage door using a pallet jack.
-A lot of these "Mate" Robodrill machines show the 0i-MC control without mention of the word mate on the control. The word mate is in the machine model name and marked on the enclosure itself. I've read mixed information on whether a 4th axis is possible to add. It sound like the 0i-Mate control does not allow it. If the machine shows the 0i-MC control (no "mate" word) is this something different from the Mate-style control and can the 4th be added? Or since the 0i-MC control is on a Mate machine does that mean its got a dumbed down Mate version of the 0i-MC control?
-Does anyone have a manual for the machine that can be shared?
Thanks!