The drive is an A06B-6079-H206. On a 1998 Chiron FZ08W with 21-M control. Controls both the X and Y axis. Drive displays Alarm 2 when servo power and encoder cables present and also when removed. Makes no difference if you leave one or the other plugged in. Still Alarm 2 on the drive,
Both On screen.
414 Servo Alarm X axis detect err
414 Servo Alarm Y axis detect err
23.89 Volts at the drive power connector.
Anything else I can check before I replace or have this thing rebuilt?
Both On screen.
414 Servo Alarm X axis detect err
414 Servo Alarm Y axis detect err
23.89 Volts at the drive power connector.
Anything else I can check before I replace or have this thing rebuilt?
