Hi Everyone,
I goofed something fierce and lost all of the parameters for our machine... I've sent e-mails to Feeler in Taiwan, to Fanuc, to the previous machine owners and to the original machine importer/distributor with hopes that someone may have a backup. I figured I would take a shot in the dark here as well and see if anyone might have a backup of the machine parameters available, or at the very least, parameters to a similar machine from Feeler from the same era.
The machine was made in 1997 and has a Fanuc 0-T controller. I'd imagine that the parameters between a lot of the other Feeler machines of this era are similar enough to use a a jump off point out of desperation anyways.
If anyone has a similar machine that would be willing to go through the process of backing up the parameters I would be extremely grateful.
Either way, just a shot in the dark. I'm pretty desperate at the moment so I figured it wouldn't hurt.
Thanks a lot,
Ray
I goofed something fierce and lost all of the parameters for our machine... I've sent e-mails to Feeler in Taiwan, to Fanuc, to the previous machine owners and to the original machine importer/distributor with hopes that someone may have a backup. I figured I would take a shot in the dark here as well and see if anyone might have a backup of the machine parameters available, or at the very least, parameters to a similar machine from Feeler from the same era.
The machine was made in 1997 and has a Fanuc 0-T controller. I'd imagine that the parameters between a lot of the other Feeler machines of this era are similar enough to use a a jump off point out of desperation anyways.
If anyone has a similar machine that would be willing to go through the process of backing up the parameters I would be extremely grateful.
Either way, just a shot in the dark. I'm pretty desperate at the moment so I figured it wouldn't hurt.
Thanks a lot,
Ray