tyleradambrown1
Plastic
- Joined
- Aug 13, 2019
Hey I've got a potential job lined up for 1-1/4 thick A36 flame cut plate, it's got a 2.5" hole that's been flame cut through it and I need to machine it to final size. I've got about 300 of these to do, and I didn't want to chew through carbide endmills on the flame cut. I only need to take around an 1/8 off to get to final diameter, does anyone know a good way to do this? right now I'm thinking about using a boring tool holder or maybe anneal the plates before I machine?
I've got a Hurco VM1 that I'm planning to use. any help would be appreciated.
I've got a Hurco VM1 that I'm planning to use. any help would be appreciated.