Lost in LA
Cast Iron
- Joined
- Jan 31, 2005
- Location
- Los Angeles
I am thinking about purchasing a Omniturn 75 CNC lathe with a bar feed, I will be mostly running mild steel parts under 5/8 inch diameter and 1 to 2 inches long. Quanties are in the range of 5000 pcs per part.
Some have external threads and some have internal threads but all are relatively simple parts.
I have a Traub A25 that I run at times, so I have some experience.
Since this is my first time into CNC I need some help on the basic questions I should ask the dealer. Also, I would like to hear from anyone who has experience on this machine.
How is Omniturns service after sales?
Can I run soluble oil instead of cutting oil?
Thanks
Lost
Some have external threads and some have internal threads but all are relatively simple parts.
I have a Traub A25 that I run at times, so I have some experience.
Since this is my first time into CNC I need some help on the basic questions I should ask the dealer. Also, I would like to hear from anyone who has experience on this machine.
How is Omniturns service after sales?
Can I run soluble oil instead of cutting oil?
Thanks
Lost