Rstewart
Stainless
- Joined
- Jun 14, 2006
- Location
- Huntsville Alabama
Hey guy's, hope everyone is doing well and making lotsa $$$
Anyways, I've somehow dodged the whole HFM craze, but I have a good application for a 4130 part. I ordered a 32mm ISCAR HELIDO UPFEED 4 flute inserted cutter along with the appropriate inserts for the material.
It's one of the M16 modular tools that screw into the holder (2.5" gage length Btw).
Material is Normalized 4130 bar
Machine is a New haas Vf-2 with 10K spindle. I need to hog off about 35Lb of material. Supposedly the inserts are good for a 1mm Depth of cut, I can finish with regular endmills.
I got tired of dicking with Iscar's site.
ANY Recommendations for SFPM and CLPT?
Anyways, I've somehow dodged the whole HFM craze, but I have a good application for a 4130 part. I ordered a 32mm ISCAR HELIDO UPFEED 4 flute inserted cutter along with the appropriate inserts for the material.
It's one of the M16 modular tools that screw into the holder (2.5" gage length Btw).
Material is Normalized 4130 bar
Machine is a New haas Vf-2 with 10K spindle. I need to hog off about 35Lb of material. Supposedly the inserts are good for a 1mm Depth of cut, I can finish with regular endmills.
I got tired of dicking with Iscar's site.
ANY Recommendations for SFPM and CLPT?