Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
G02 Radius Help ending point length
- Thread starter Walter321
- Start date
- Replies 18
- Views 1,962
Booze Daily
Titanium
- Joined
- Sep 18, 2015
- Location
- Ohio
asdfghjkl;
Booze Daily
Titanium
- Joined
- Sep 18, 2015
- Location
- Ohio
Starting dia = .500
Ending dia = .350
Difference is .150 or .075 per side
Radius is .300, so any place that radius touches your part is .300 to the center.
.300R -.075 per side gives .225 length for that leg of a right triangle.
Hypotenuse of the right triangle is .300 because that is the other point that your radius touches the part. Solve for the missing leg of the triangle.
Ending dia = .350
Difference is .150 or .075 per side
Radius is .300, so any place that radius touches your part is .300 to the center.
.300R -.075 per side gives .225 length for that leg of a right triangle.
Hypotenuse of the right triangle is .300 because that is the other point that your radius touches the part. Solve for the missing leg of the triangle.
Booze Daily
Titanium
- Joined
- Sep 18, 2015
- Location
- Ohio
No.
I've given you everything you need. This is basic shop math.
I even gave you the equation to solve. If I gave you the answer, you wouldn't learn anything, now would you?
SMH
I've given you everything you need. This is basic shop math.
I even gave you the equation to solve. If I gave you the answer, you wouldn't learn anything, now would you?
SMH
G
guest
Guest
Booze Daily
Titanium
- Joined
- Sep 18, 2015
- Location
- Ohio
Build a man a fire and you warm him for a day.
Set a man on fire and he's warm for the rest of his life.
(or something like that)
Set a man on fire and he's warm for the rest of his life.
(or something like that)
G
guest
Guest
Give a man a fish and you feed him for a day.
Teach a man to fish and he sits in a boat and drinks beer all day...
Teach a man to fish and he sits in a boat and drinks beer all day...
Booze Daily
Titanium
- Joined
- Sep 18, 2015
- Location
- Ohio
How did you come up with that number and what does it signify?
EmGo
Diamond
- Joined
- Apr 14, 2018
Nice drawing. But he should be programming from the center of the tool nose radius and that sharp edge on the right needs a radius also or you'll get a burr
Booze Daily
Titanium
- Joined
- Sep 18, 2015
- Location
- Ohio
Nice drawing. But he should be programming from the center of the tool nose radius and that sharp edge on the right needs a radius also or you'll get a burr
Cutter comp and tool tip #'s are next week.
The ending length of the radius
So the starting Z point of where the radius begins is Z-.750 the ending I got Z- 9936
That's why I was looking to walk thru it step by step, just trying to learn on the fly.
I am a centerless grinder trying to get a job going. Our cnc guy passed away.
Thank you
So the starting Z point of where the radius begins is Z-.750 the ending I got Z- 9936
That's why I was looking to walk thru it step by step, just trying to learn on the fly.
I am a centerless grinder trying to get a job going. Our cnc guy passed away.
Thank you
Booze Daily
Titanium
- Joined
- Sep 18, 2015
- Location
- Ohio
I did walk you thru it step by step. All I left for you to do is subtraction, it don't get much simpler.
Start is correct, end Z is not.
Start is correct, end Z is not.
Booze Daily
Titanium
- Joined
- Sep 18, 2015
- Location
- Ohio
Winner winner chicken dinner.
Nerdlinger
Stainless
- Joined
- Aug 10, 2013
- Location
- Chicago, IL
Bravo, Booze Daily! Bravo! 
