cosmos_275
Hot Rolled
- Joined
- Jun 9, 2015
Trying to insert a G41 into code to tweak a bore size on a part. For some reason, if the call is before the G100 toolchange it doesn't work. The G40 is shown to be active while boring. If I do two consecutive bores and put the G41 in between, it works. My post processor (using Inventor HSM 2016, can't upgrade to current post, I tried) puts the G41 pass through before the tool change even though it appears to be after, see pic.
Anyway, can anyone tell me what is cancelling the G41?
Thanks
G00 Z27.855
G83 X45.108 Y-38.288 Z-24.616 R26.855 Q10 F1900
X107.508 Y-38.266
G80
G00 Z37.855
G41
M05
(BORE1)
G54
M09
G100 T28 X44.766 Y-37.164 G43 Z37.855 H28 D28 S7000 M03
M08
G00 X44.766 Y-37.164
G00 Z37.855
G00 Z23.855
G01 Z22.49 F1500
G01 X44.76 Y-37.159 Z22.391
Anyway, can anyone tell me what is cancelling the G41?
Thanks
G00 Z27.855
G83 X45.108 Y-38.288 Z-24.616 R26.855 Q10 F1900
X107.508 Y-38.266
G80
G00 Z37.855
G41
M05
(BORE1)
G54
M09
G100 T28 X44.766 Y-37.164 G43 Z37.855 H28 D28 S7000 M03
M08
G00 X44.766 Y-37.164
G00 Z37.855
G00 Z23.855
G01 Z22.49 F1500
G01 X44.76 Y-37.159 Z22.391