I'm trying to make my bobcam post processor for my hardinge cobra42 more efficient, the canned cycles never seemed to work, so I have some time to go and fix them so my programs can be smaller. I'm running into a 65 error from the fanuc control (illegal command in g71-73). I carefully read the hardinge manual and carefully checked the code bobcam was generating. It seems to be what the controller would like, but I keep getting the error... a few more eyes on the problem may show me something I'm missing. thanks
Code:
%
O0100
(THU. 05/06/2021 12:46PM)
G28 U0.
G28 W0.
N1G0T0707(TOOL #7 vcmt rougher)
G50S1000
G96S500M3
G0G40X1.325Z1.M8
Z.0737
G72W.025R.1
G72P2Q3U.01W.005F.015
N2G0
Z-.0313
G1X1.125
X0.
N3Z.0687
G40
G0X1.325
Z2.5
X5.
M9
T0700
M01
G28 U0.
G28 W0.
N4G0T0909(TOOL #9 diamong finisher .0313 rad)
G50S1000
G96S500M3
G0G40X1.325Z1.M8
G0
Z.3
Z-.0313
G1X1.125F.015
X0.
Z.0687
Z.1
G0
Z.3
Z2.5
G40
M9
T0900
M30
%