Kenre
Cast Iron
- Joined
- Apr 25, 2007
- Location
- Melbourne Australia
Bit of Self learning with canned cycles.
I managed to get the G71 cycle working fine. But having issues with the grooving one.
For some reason i cannot get it to feed at anything more than a snails pace.
Ive tried different F rates but no change.
The code is,
N630 M01
N640 T0606
N680 M08
N690 G50 S1000 M03
N700 G00 X-60 Z0.
N710 G01 Z-11.0 F200
N720 G75 R5
N730 G75 X17.0 Z-15.0 P14 Q2500 F200
What have i missed?
I managed to get the G71 cycle working fine. But having issues with the grooving one.
For some reason i cannot get it to feed at anything more than a snails pace.
Ive tried different F rates but no change.
The code is,
N630 M01
N640 T0606
N680 M08
N690 G50 S1000 M03
N700 G00 X-60 Z0.
N710 G01 Z-11.0 F200
N720 G75 R5
N730 G75 X17.0 Z-15.0 P14 Q2500 F200
What have i missed?